Crystal GaugeCalXP Manuel d'utilisateur télécharger pdf (Page 4)

Operation  2

GaugeCalXP Operation Manual

Operation

Follow these instructions for safe and reliable operation of your GaugeCalXP Pressure Comparator.

1 Mount the c

omparator to your bench or table: At higher pressures the force required to rotate the handle may cause the base of the comparator to lift.

Baseplate

16.25

(0.34)

19.4

(0.76)

Ø 10.00 (Ø 0.39), 4 places

Maximum bolt size: 8mm or 5/16"

174.9

(6.88)

142

(5.60)

390

(15.35)

428.8

(16.88)

All dimensions in mm (in)

Baseplate dimensions and suggested bolt sizes

2 Install the CPF-compatible  ttings and any applicable adapters:

Crystal Pressure Fittings (CPF) simplify your connections and create ﬁ nger-tight, leak-free connections up to 10 000 PSI/700 bar/70MPa working pressure.

No sealing tape is required. See the diagram below, or visit the website, for more information on CPF.

our GaugeCalXP is ﬁ tted with a CPF base (7/16-20 MP) and will connect with the two included CPF male ﬁ ttings (MPM-MPM) and two included 1/4" female

ﬁ ttings (MPF-1/4FPT). Should you have a need for additional ﬁ ttings, visit crystalengineering.net or contact your Crystal Distributor. Refer to the diagram

on the f

ollowing page for connection information.

Finger-tight seal uses a

Viton 90 o-ring for a seal up to

10 000 PSI / 700 bar/ 70MPa

(-20 to 50

Wrench-tight creates a

metal/metal seal up to

10 000 PSI / 700 bar/ 70MPa

(-40 to 150

point of contact

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Crystal GaugeCalXP Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Crystal GaugeCalXP