Crystal nVision Lab Reference Manuel d'utilisateur télécharger pdf (Page 3)

Introduction  1

nVision Programming Instructions

—

INTRODUCTION

Thank you for choosing the nVision Reference Recorder from Crystal Engineering Corporation. Your nVision is a combination of leading edge

technology and rugged industrial design.

e hope your nVision meets your expectations, and we’re interested in any comments or suggestions you may have. You can send us a note at:

crystal@ametek.com

Many features in this and our other products are a direct result of your comments!

Digital Interface

The nVision can be connected to a personal computer via mini-USB, using the provided USB cable. The nVision can be operated remotely, as if you were

pressing the buttons. You can use a simple terminal program to send the commands, or, you can incorporate them into your own software program.

I/O Settings

The serial interface settings are:

Baud Rate Data Bits Parity Stop Bits Flow Control

11520 0 8 None 1 None

1 2 3 4 5 6 7 8 ... 11 12

Pas de commentaire

Crystal nVision Lab Reference Manuel d'utilisateur Page 3