Crystal GaugeCalHP Pressure Comparator Manuel d'utilisateur télécharger pdf (Page 9)

GaugeCalHP Rebuild Kit Instructions



7

PN 5139

PN 5141

PN 5145

PN 5129

PN 5142

PN 5142

—

Reservoir Assembly

1 From the underside of the Reser-

voir, remove the Fitting from the

Reservoir Base.

2 Remove the Reservoir Fitting and

replace the two O-rings (

P N 5139)

and (

P N 5141).

3 From the topside of the Reservoir,

remove the Reservoir Knob.

4 Using a Phillips-head screwdriver,

remove the two Reservoir Cap

Sealing Screws (

P N 5145), and then

remove the Reservoir Cap.

5 Remove the Reservoir Knob Seal

(

P N 5129) and the large O-ring

(

P N 5142) from the Reservoir Cap.

Note that the wider surface of the

Reservoir Knob Seal is facing down.

6 Remove the Reservoir Tube from

the Reservoir Base.

7 Remove the large O-ring (P N 5142)

from the Reservoir Base.

8 Rebuild the Reservoir Assembly by

following the preceding steps in

reverse order.

Note that the reservoir tube should

be oriented so that the etched ll

line is near the top.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire